What is the reason why wire cutting cannot cut stainless steel? Wire cutting machine tool recommended manufacturer [Zhikai CNC]

Stainless steel is a metal material with high hardness and corrosion resistance, so it may encounter some difficulties when cutting stainless steel. The following are some reasons why stainless steel cannot be cut and their solutions:

1. Stainless steel has high hardness:

Stainless steel is usually harder than other metal materials, which makes wire cutting more difficult. One solution is to use a higher powered wire cutting machine to increase the cutting capacity.

2. Incorrect cutting parameters:

Different materials and thicknesses require different cutting parameters. If they are not adjusted properly, the cutting effect will be affected.

3. Stainless steel has poor thermal conductivity:

Stainless steel has poor thermal conductivity, which means that a lot of heat may be generated during the cutting process, causing the cutting wire to overheat and not work properly. To solve this problem, you can try using coolant to reduce the temperature of the cutting area. In addition, you can adjust the cutting speed and power to avoid overheating.

4. Stainless steel is thicker:

Stainless steel is often used to make thicker components, which makes wire cutting more difficult. To solve this problem, multi-wire cutting technology can be used, that is, using multiple cutting wires to cut at the same time to increase the cutting capacity. In addition, pre-cutting technology can be used, that is, pre-cutting before cutting to reduce the cutting thickness before final cutting.

5. Stainless steel has high surface quality requirements:

Stainless steel is often used to make components that require a high surface quality, which makes wire cutting more difficult. To solve this problem, thinner cutting wires can be used to improve cutting accuracy. In addition, auxiliary processing techniques such as electrolytic polishing can be used to improve the surface quality after cutting.

In conclusion, wire cutting of stainless steel may encounter some difficulties, but by selecting the appropriate wire cutting machine, adjusting the cutting parameters, and using auxiliary processing technology, these difficulties can be overcome to achieve efficient and precise cutting.

Zhikai ZKH550 wire cutting machine, five-axis servo drive, supports upper and lower special-shaped cutting, temporary axis shifting and one-key depth setting, and cutting of complex curved surfaces. It can achieve extremely high processing accuracy and surface roughness requirements, with excellent performance and easy operation! For more detailed information, please follow Zhikai CNC!