Welcome to Suzhou ZhiKai CNC Technology Co., Ltd.!
Position: 首页 - News
News
  • News / 09/24/2024

    How to determine the counting direction in CNC wire cutting?

    CNC wire cutting is a processing method that uses a CNC system to control the cutting tool to perform cutting. When performing CNC wire cutting, it is necessary to determine the counting direction, that is, to determine the positive direction of each axis in the CNC system. The following will introduce how to determine the counting direction of CNC wire cutting.

    View
  • News / 09/24/2024

    What is the reason for low high-frequency voltage of wire cutting? [Zhikai CNC professional answer]

    Wire cutting is a common metal processing method that applies high-frequency voltage to the surface of the workpiece to generate electric sparks between the workpiece and the electrode, thereby cutting, cutting and engraving the workpiece. However, in practical applications, sometimes the high-frequency voltage of wire cutting is low, which may be caused by the following reasons: 1. Power supply problem: The unstable power supply or low power supply voltage of the wire cutting machine will cause low high-frequency voltage of wire cutting. This may be caused by aging of the power line, power supply voltage fluctuation or insufficient power capacity. The solution to this problem is to check the power line, ensure the stable power supply, and replace the power supply or increase the power capacity as needed.

    View
  • News / 09/24/2024

    How to adjust the parameters of high frequency wire cutting? [Zhikai CNC professional answer]

    Wire cutting is a common metal processing method. It uses high-frequency current to generate discharge between the workpiece and molybdenum wire, and uses the heat energy of the electric spark to cut the workpiece into the desired shape. Adjusting the frequency of wire cutting can affect the cutting effect and processing quality. The following will introduce some methods of adjusting the frequency of wire cutting.

    View
  • News / 09/24/2024

    How to adjust the processing speed of fast wire cutting? [Zhikai CNC]

    1. The slow processing speed of fast wire cutting may be due to the following reasons: 1. Improper cutting parameter settings: The slow processing speed of fast wire cutting may be due to unreasonable cutting parameter settings. Too slow cutting speed, too small current, too low pulse frequency, etc. will lead to slow cutting speed. Correctly setting cutting parameters can increase cutting speed.

    View
  • News / 09/24/2024

    How to program a circle for wire cutting? Wire cutting machine source manufacturer [Zhikai CNC]

    Wire cutting is a common metal processing method. It can achieve complex shape cutting by cutting workpieces with high-speed cutting wires. In wire cutting, programming circles is an important technology, which can be used to cut circular workpieces or cut circular holes in workpieces. The process of manually programming a circle can be divided into the following steps:

    View
  • News / 09/24/2024

    What is the reason for the white sparks of high-frequency wire cutting? Wire cutting machine source manufacturer [Zhikai CNC]

    The whitening of high-frequency sparks during wire cutting is a common phenomenon, which is mainly caused by the high-frequency sparks generated during wire cutting. Wire cutting is a processing method that uses the principle of electric spark discharge to cut metal. The principle is to melt the metal on the surface of the workpiece through the electric spark discharge between the electrode and the workpiece, thereby achieving the purpose of cutting.

    View
  • News / 09/24/2024

    Teaching wire cutting programming to beginners, what are the programming methods?

    Wire cutting programming is a highly technical task that requires the operator to have deep mechanical knowledge and program programming skills. In modern manufacturing, the importance of wire cutting programming is becoming increasingly prominent because it directly affects the accuracy and production efficiency of products. Below, Zhikai CNC will introduce you in detail the basic concepts, steps and techniques of wire cutting programming, as well as the ways and methods of learning wire cutting programming. 1. Basic concepts of wire cutting programming Wire cutting programming refers to the control of the motion trajectory and cutting speed of the wire cutting machine tool by writing CNC programs according to the design drawings and processing requirements on the CNC wire cutting machine tool.

    View
  • News / 09/24/2024

    What is gap compensation in wire EDM?

    Wire EDM is a commonly used metal cutting process, which generates high-frequency electric spark discharge on the workpiece surface, and uses the high temperature and high energy of the electric spark to melt and evaporate the metal on the workpiece surface, thereby achieving the purpose of cutting. However, in practical applications, due to the existence of a certain gap in wire EDM, gap compensation is required.

    View
  • News / 09/24/2024

    What are the factors that affect the cutting speed of medium wire cutting? Wire cutting machine source manufacturer [Zhikai CNC]

    Medium wire cutting is a common metal cutting process, and its cutting speed is one of the important indicators for judging its performance. The cutting speed directly affects production efficiency and product quality. The following will introduce the definition of cutting speed, influencing factors and evaluation criteria in detail. First of all, cutting speed refers to the length of the cutting line per unit time, usually expressed in millimeters per minute (mm/min). Cutting speed is mainly affected by the following factors:

    View
  • News / 09/24/2024

    The company organized a large-scale team-building activity: an autumn trip to the Taihu Lake, where employees enjoyed team-building together

    Suzhou Zhikai CNC Technology Co., Ltd. organized a unique autumn outing to further enhance the connection and communication between employees and improve team cohesion. The event chose the shore of Taihu Lake as the destination, focusing on outdoor team-building games and appreciation of natural scenery, bringing an unforgettable autumn outing to all employees. Since its establishment, Suzhou Zhikai CNC Technology Co., Ltd. has always been committed to innovation and development in the field of wire EDM machine tools. With excellent product quality and outstanding technical strength, the company has already made its mark in the national machinery manufacturing industry. In order to further give back to employees and enhance the relationship between employees

    View
CHAT US
CONTACT US
CONTACT
Scan code to add WhatsApp
CALL US
TOP