How to roll back wire cutting? [Zhikai CNC professional answer]

Wire cutting is a common metal processing method that can be used to cut metal materials of various shapes. When performing wire cutting, sometimes you may need to retract the cutting position in order to readjust the cutting direction or correct cutting errors. The following will introduce some common wire cutting retraction methods.

1. Use the automatic retraction function of the wire cutting machine:

Some advanced wire cutting machines are equipped with a retract function, which can be achieved by pressing the retract button or toggling the retract switch. This method is relatively simple, just press the retract button to retract the cutting head to the required position.

2. Manually retract the cutting head:

If the wire cutting machine does not have a retraction function, you can manually retract the cutting head to achieve retraction. First, lift the cutting head to a safe height, then gently pull the cutting head back along the cutting direction until it retracts to the desired position. This method requires a certain amount of strength and skill, and you need to be careful not to over-retract or damage the cutting head.

3. Use cutting marks:

When performing manual wire cutting, you can mark a cutting point at the cutting position so that you can find the exact retraction position when you need to retract. You can use a punch or other marking tool to make a small hole or mark the cutting position, and then align the cutting head with the marked point when you need to retract.

It is important to ensure safe operation when retracting the manual wire cutting. First, wear protective glasses and gloves to prevent sparks and debris from metal cutting. Second, ensure that the cutting head retracts to a safe position to avoid collision with other objects or damage. Finally, be familiar with the manual of the manual cutting machine and understand its retraction function and operation method to ensure correct operation.

Zhikai's patented high-frequency technology, 6.5A high current, stable cutting speed of 9000-10000 square millimeters per hour, and low molybdenum wire loss; no need to use customized cutting fluid, saving use costs; new cool cutting control software, not picky about computers, can communicate with an Internet port, no driver installation required. For more knowledge, please consult Zhikai CNC: 180-1313-1588!