Detailed instructions for using the wire cutting machine control cabinet! Wire cutting machine supplier [Zhikai CNC professional answer]

1. Overview of control cabinet

The wire cutting machine control cabinet is one of the core components of the wire cutting machine, which is used to control the operation of the wire cutting machine. The control cabinet consists of the main controller, power module, driver, operation panel, etc.

II. Installation of the control cabinet
1. The control cabinet should be installed in a dry, well-ventilated place, away from water sources and flammable materials.
2. The control cabinet should be connected to the power supply of the wire cutting machine to ensure stable power supply.
3. The grounding wire of the control cabinet should be connected to a reliable grounding point to ensure safety.

3. Operation of the control cabinet
1. Turn on the power switch of the control cabinet to ensure that the power supply is normal.
2. Press the start button and the control cabinet starts to run.
3. The buttons and switches on the operation panel are used to control the various functions of the wire cutting machine. Operate as needed.
4. The indicator lights on the control cabinet are used to display the operating status of the wire cutting machine, such as the power indicator light, the operation indicator light, etc.
5. During the operation, if you encounter any abnormal situation, you should stop the operation immediately and check the cause of the fault.

IV. Maintenance of the control cabinet
1. Clean the dust and debris inside and outside the control cabinet regularly to keep the control cabinet clean.
2. Check the power cord and wiring terminals of the control cabinet regularly to see if they are loose or damaged, and repair or replace them in time.
3. Check the radiator and fan inside the control cabinet regularly to see if they are operating normally to ensure good heat dissipation of the control cabinet.
4. Check the electronic components and connecting wires inside the control cabinet regularly to see if they are normal. If they are damaged or aged, they should be replaced in time.
5. Check the grounding wire of the control cabinet regularly to see if it is well connected to ensure safety.

V. Troubleshooting of the control cabinet
1. If the control cabinet cannot be started or runs abnormally, first check whether the power supply is normal, and then check whether the connection wires inside the control cabinet are loose or damaged.
2. If a fault occurs during the operation of the control cabinet, stop the operation immediately and check the cause of the fault. If the fault cannot be solved, contact the after-sales service personnel for repair in time.

VI. Precautions
1. When operating the control cabinet, pay attention to safety and avoid touching high-voltage parts and moving parts to avoid accidents.
2. When operating the control cabinet, follow the operating instructions and do not change parameters and settings at will to avoid affecting the normal operation of the wire cutting machine.
3. When maintaining the control cabinet, cut off the power supply first to ensure safety.
The above is the instruction manual for the wire cutting machine control cabinet, I hope it can help users in the process of use. If you have any other questions, please contact after-sales service personnel in time.

Zhikai medium-speed wire cutting manufacturer provides customized services for wire EDM machines. The pitch compensation function of the self-developed cool-cut software can correct the machine tool accuracy through the laser interferometer to solve the problem of poor machining accuracy encountered by customers. Welcome to consult Zhikai CNC: 180-1313-1588!