How to adjust the tightness of molybdenum wire for wire cutting?

Wire cutting is a common metal processing method. During the wire cutting process, the tightness of the molybdenum wire has an important influence on the cutting quality and efficiency. Therefore, adjusting the tightness of the molybdenum wire is one of the key steps in wire cutting. The following will introduce some methods to adjust the tightness of the molybdenum wire.

1. Adjust the tension of the wire cutting machine:

The tightness of the molybdenum wire can be controlled by adjusting the tension of the cutting machine. Generally speaking, the greater the tension of the cutting machine, the tighter the molybdenum wire; the smaller the tension, the looser the molybdenum wire. The tension can be changed by adjusting the tension adjustment device on the cutting machine. For specific adjustment methods, please refer to the instruction manual of the cutting machine.

2. Replace the molybdenum wire:

If the molybdenum wire is loose, check whether the molybdenum wire is worn or aged. If this is the case, it is recommended to replace it with a new molybdenum wire to ensure the processing quality.

3. Adjust the cutting pressure of the cutting machine:

The cutting pressure of the cutting machine will also affect the tightness of the molybdenum wire. Generally speaking, the greater the cutting pressure, the tighter the molybdenum wire; the smaller the cutting pressure, the looser the molybdenum wire. The cutting pressure can be changed by adjusting the cutting pressure adjustment device on the cutting machine. For specific adjustment methods, please refer to the instruction manual of the cutting machine.

4. Adjust the hanging height of molybdenum wire:

For longer molybdenum wires, the tightness may be insufficient. In this case, the hanging height of the molybdenum wire needs to be adjusted appropriately to ensure the stability of the molybdenum wire during processing.

5. Adjust the cutting angle of the cutting machine:

The cutting angle of the wire cutting machine will also affect the tightness of the molybdenum wire. Generally speaking, the larger the cutting angle, the tighter the molybdenum wire; the smaller the cutting angle, the looser the molybdenum wire. The cutting angle can be changed by adjusting the cutting angle adjustment device on the cutting machine. For specific adjustment methods, please refer to the instruction manual of the cutting machine.

Suzhou Zhikai CNC Technology Co., Ltd. independently develops high-frequency pulse power supply with low molybdenum wire loss. When the machine tool is in normal condition, it can effectively cut 200,000-300,000 square wires (18-17 wires). Welcome to consult Zhikai CNC: 180-1313-1588!