Welcome to Suzhou ZhiKai CNC Technology Co., Ltd.!
Position: 首页 - Wire Cut - 第4页
Wire Cut
  • How to compensate for the repair of the wire cutting machine? Wire cutting machine tool supplier [Zhikai CNC]

    The wire cutting trimmer is a tool commonly used for metal cutting. It cuts metal materials through high-speed rotating wire. During use, due to the influence of various factors, some errors may occur in the cut workpiece, which requires compensation to correct the cutting error to ensure the accurate size of the cut workpiece. The specific compensation method is as follows:

    View
  • Energy Equipment Development Solutions

    [Introduction] With the transformation of the global energy structure and the improvement of environmental awareness, the development and utilization of renewable energy has gradually become the focus of attention. Wind power generation and solar power generation, as two important renewable energy sources, have broad application prospects. However, how to effectively develop and utilize these energy sources is a challenge facing many companies and investors. Suzhou Zhikai CNC Technology Co., Ltd. relies on years of technical accumulation and experience to provide customers with one-stop energy equipment development solutions, including wind power generation equipment and solar power generation equipment, etc., to meet the needs of different customers.

    View
  • How to debug the parameters of high-speed wire cutting control cabinet?

    1. Understand the basic parameters of the control cabinet: Before debugging, you must first understand the basic parameters of the control cabinet, including input voltage, output voltage, current,

    View
  • How to adjust the fast wire cutting when machining thicker workpieces

    When performing wire cutting, if the thickness of the workpiece is large, we need to take some measures to ensure the quality and efficiency of cutting. The following are some methods that can help us deal with thicker workpieces:

    View
  • What is the change from fast wire cutting to medium wire cutting? What is the effect?

    The transformation of a fast-wire WEDM machine into a medium-wire WEDM is an engineering technology that involves adjusting the structure and system of a fast-wire WEDM machine to meet the needs of medium-wire processing. In this transformation, the key components and control systems of the machine tool are usually redesigned and replaced to ensure that the machine tool can perform medium-wire processing stably and efficiently.

    View
  • Why is the molybdenum wire easy to loosen during wire cutting?

    Wire cutting of molybdenum wire is a common metal processing method. It can be used to cut various metal materials, such as steel, aluminum alloy, etc. However, wire cutting of molybdenum wire is prone to loosening during use, which brings certain troubles to the processing process. This article will discuss the causes, effects and solutions of loosening.

    View
  • How to adjust the tightness of molybdenum wire for wire cutting?

    Wire cutting is a common metal processing method. During the wire cutting process, the tightness of the molybdenum wire has an important influence on the cutting quality and efficiency. Therefore, adjusting the tightness of the molybdenum wire is one of the key steps of wire cutting. The following will introduce some methods to adjust the tightness of the molybdenum wire. 1. Adjust the tension of the wire cutting machine: The tightness of the molybdenum wire can be controlled by adjusting the tension of the cutting machine. Generally speaking, the greater the tension of the cutting machine, the tighter the molybdenum wire; the smaller the tension, the looser the molybdenum wire. The tension can be changed by adjusting the tension adjustment device on the cutting machine. For specific adjustment methods, please refer to the instruction manual of the cutting machine.

    View
  • Briefly describe the power on and off steps and precautions of wire cutting machine tools! [Zhikai CNC professional answer]

    Wire cutting machine is a commonly used metal processing equipment, used to cut and process metal materials. When using wire cutting machine, you need to follow certain power on and off steps and precautions to ensure safe and normal operation.

    View
  • How to compensate the direction of the inner hole in wire cutting? [Zhikai CNC professional answer]

    When cutting inner holes online, the diameter of the cutting tool and the characteristics of the cutting path will cause the size of the inner hole to be smaller. In order to compensate for this size deviation, the following methods can be adopted: 1. Molybdenum wire radius compensation: Molybdenum wire radius compensation is a commonly used compensation method. When cutting an inner hole, the diameter of the molybdenum wire will cause the inner hole size to be smaller. By adding a compensation value of the molybdenum wire radius to the cutting path, the size of the inner hole can meet the design requirements. Molybdenum wire radius compensation can be set through the CNC programming software, and the cutting path is automatically offset by calculation based on the diameter of the molybdenum wire and the compensation value.

    View
  • Why are there sparks when the high frequency of wire cutting is turned off? Recommended wire cutting machine tool manufacturer [Zhikai CNC]

    Wire cutting is a common metal processing method that uses high-frequency current to generate sparks on metal workpieces to achieve cutting. However, sometimes even if the high frequency of wire cutting is turned off, sparks will still appear. The following will explain this problem from several possible reasons.

    View
CHAT US
CONTACT US
CONTACT
Scan code to add WhatsApp
CALL US
TOP